TrackIt – Anything Power

FEATURES

REPORTING: By default, TrackIt Anything Power is set to report once a day whether it moves or not. Using its 3-Axis Accelerometer, the device will “sleep” to conserve energy while not moving. It will “wake-up” whenever movement is detected. It will report in at the beginning of a trip, record location every minute, and upload every 5 minutes. This configuration can be adjusted if required.

EQUIPMENT HOUR TRACKING: An excellent option for rental equipment or equipment where hour tracking is important. An ignition wire can be connected to track ignition/engine hours.

CUSTOMISABLE ALERTS:  When paired with our Rangetel software, you can create customisable alerts.

• Never miss an oil change, set hourly based engine/ignition alerts
• Easily create Geo Fences to know when your asset has left or has arrived at a predefined area

COVERAGE: TrackIt Anything works anywhere in North America where LTE-M1 coverage is available. If the unit fails to receive cellular connectivity, it will store its GPS coordinates with corresponding time stamps and upload to the Rangetel software when it reaches coverage again.  The massive onboard flash memory has the capability to store more than 10,000,000 data points.

HOUSING: IP67 Rated housing ensures the device can withstand fine dust, high pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures. Designed to achieve a minimum footprint and maximum strength and tolerance without compromising antenna performance.

BACKUP BATTERY: If your asset is not being run everyday, do not worry; TrackIt Anything Power has an on-board Lithium Polymer rechargeable battery that will ensure its whereabouts are reported every day.  It also works with the latest LTE Cat M1 networks and is built with ultra low power hardware to ensure prolonged backup battery life. Combined with Rangetels advanced software, this unit is designed to outlast all other tracking devices on the market.

*** PLEASE NOTE ***
TrackIt Anything Power Requires External DC Power – You will be required to wire this unit to a power source (8V to 36 VDC). If your asset does not have an available power source, check out our TrackIt Anything model.

SPECIFICATIONS

DIMENSIONS (L x W x H): 125 x 80 x 25 mm or 5 x 3 1/8 x 1 inches
HARNESS: 7 Wire harness, 1m or 39″ in length
POWER: Requires 8V to 36V DC (max)
BACKUP BATTERY: 1100mAh LiPo internal backup battery pack
SELF-RESETTING FUSE: The G62 passes stringent power “load dump” tests to ensure it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe.
FLASH MEMORY: Sufficient memory to store weeks of records. Normally data is sent to the server immediately but if the device is out of range there is space to ensure data is saved.
ACCELEROMETER: The 3-axis accelerometer allows the device to ‘sleep’ when not moving or running, resulting in extremely low standby current.
MODEM: uBlox SARA-R410-02B Modem operates on all major global LTE-Cat-M1 and NB-IoT bands. *Our units are configured to only work on the Cat-M1 networks. These new low-power networks are specifically designed for IoT applications, providing greater battery life. Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 25, 26*, 28 (* roaming bands).
GPS/GLONASS: UBLOX EVA-M8Q – High sensitivity assisted GPS receiver with TCXO, 72 Channel (-167dBm)
LOW NOISE GPS AMPLIFIER: GPS Signals are boosted by a special low-noise amplifier (LNA). This allows operation where normal units will fail to receive GPS signal.